Sense Sidekik Pod System

Sense Sidekik Pod System

Sense Sidekik Pod System Product Contents:

• 1 x Sidekik Pod Device
• 2 x Replacement Coils (1.1 Ohm)
• 1 x Pod Cartridge
• 1 x Micro USB Cable
• 1 x User Manual
• 1 x Warranty Card

The Sense Sidekik is a AIO Kit that has a Draw Activated Firing System, so there is no fire button. It has a Internal 460mAh Battery with a Max Wattage Output of 15W. It uses a 2mL Refillable Pod & 1.1 Ohm Coils.

The Sidekik Pod System Kit is a great little Device for On-the-go or Travel. The Connection is Gold Plated and Proprietary. It is available in 8 Colors: Black, Blue, Green, Purple, Rainbow, Red, White, & Yellow. This is a simple AIO Kit that just works.

This is Sense’s 1st Pod System but if this matches the quality & performance of their other products it will be another winner.

Device Protections:

• 8 Second Cut-Off
• Short Circuit Protection
• Low Voltage Protection
• Low Resistance Protection

Mode – Battery Indicator:

• Normal Mode –
  • When inserting the Cartridge it will Flash Green Once.
  • Green > 3.5V (Battery High)
  • Red < 3.5V (Battery Low)
• Strong Mode –
  • When inserting the Cartridge it will Flash White Once.
  • White > 3.5V (Battery High)
  • Red < 3.5V (Battery Low)

Changing from Normal Mode to Strong Mode – Inhale Quickly 5 times in 5 seconds.

• Changing From:
  • Normal > Strong = LED will flash Green 3 times & turn White for 3 seconds.
• Changing From:
  • Strong > Normal = LED will flash White 3 times & turn Green for 3 seconds.
• The Device is originally set from the Factory to Normal Mode.

Product Use Instructions:

• Pull out Cartridge from Device.
• Prime Coil with a few drops of eJuice.
• Insert Coil into Cartridge.
• Fill Cartridge with eJuice.
• Insert Cartridge into Device. (LED will flash once)

Charging:

Connect via USB to Wall. The Battery LED Indicator will stay Red while Charging. The light will turn off when the Device is fully charged. It takes 60 minutes to fully charge.

Cleaning:

If you connect the Cartridge to the Battery and there is no LED Flashing this means the Device needs cleaning.

• Use a Tweezer to take out the rubber pad from the Battery.
• Gently clean the surface under the rubber pad with a Q-tip / Cotton Swab.
• Insert the rubber pad back into place & the Device is ready for use.

LED Indicator Notifications:

Safety Protection –

• White Light flashes 3 times = Short Circuit Protection.
• Blue Light flashes once = Cartridge removed from Device.
• Red Light Flashes once = No Cartridge in Device.
• Red Light Flashes 3 times = Low Voltage Protection. (Below 3.3V Device stops working)
• LED Flashes 8 times = Over Use Protection (8 second cut-off)
• Device Stops Working = Resistance is less than .8 Ohms. (Low Resistance Protection)

Other Pod Systems.